RPM85U/RPM85S panel mounting power analyser according IEC 61000-4-30 class S
Created on 01.05
panel mounting power analyser according IEC 61000-4-30 class S
The network analyzer RPM85U/RPM85S for accurate monitoring of main electrical parameters in three phase or single phase networks.
The instrument measures continuous voltage and current according to the norm EN61000-4-30 class S. Thanks to precise measurement
and a high sampling rate. It is also ideal for particular measuring points in electrical energy monitoring systems. The communication interface
RS485 with Modbus RTU protocol predefine RPM80/RPM85S can be used as measure point in SCADA system.
▶Identification of installation errors (eg: CT wiring errors)
▶True RMS measurements
▶Measurements: VL-L, VL-N, I, In, Cos∅, Pf, total Pf, Hz, W, ∑W, Va, ∑Va, Var, ∑Var, import Kwh, export Kwh,
import Kvarh , export Kvarh , VTHD , I-THD , 1-63th harmonic , system running hours , % voltage unbalance , % current unbalance , % system load
▶3 voltage and 4 current input (Measure or calculate the neutral current)
▶Voltage Input: 0-690Vac, Current input: 1 or 5A CT selective
▶Maximum, minimum and demand for U, I, P, Q, S in hours, days, months
▶Real time clock with integrated backup battery
▶Multi-tariffe energy measurement
▶4 quadrants energy measurement support bi-directional power monitoring includes measurement on regenerative loads, also monthly energy calculation
▶2 digital input and 2 relay output (alarm or remote control)
▶RS485 communication: Modbus RTU
▶Waveforms and phase diagram for voltage, current
▶Alarm event log
▶Micro SD for data logger (support 32GB, only for RPM85S)
▶USB port(Type C) for data transfer (only for RPM85U)
▶Built in 64M flash memory for data logger (only for RPM85U)
▶Data recorded in standard excel file formats for further EN50160 analysis
▶Additional functions by plugging in optional modules
▶Large backlit screen
Data logger and software
Power monitoring software (PCMS) is designed for remote control and management of all Romaz instruments equipped
with communication interface. Standard excel file formats gives the possibility to have a quick view and analysis on all stored
data without any special software. PCMS is provided to perform statistical analysis and generate reports on recorded data
according to EN50160 PQ standard.
Frequently Asked Questions
1. All models support :
• 4-quadrant energy measurement.
• Operating voltage (Un): 85...265Vac/110...330Vdc
• Operating voltage (Un): 12...48VDC
2. Q: Does it support RS-485 (MODBUS RTU)?
A: Supported.
3. Q: Does it support Ethernet (MODBUS TCP/IP)?
A: The following models are order-configurable:
RPM100/100C,RPM95/95C,RPM90/90C,RPM80/80m,RPM65/65C,RPM60/60m,
DM400,DM1000,RPM100S,RPM95U/95S, RPM85U/85S.
4. Q: Supported power grid types?
A: 3P3W, 3P4W, 2P3W, 1P2W.
5. Q: Measured grid frequency?
A: 50/60Hz.
6. Q: Maximum measurable input voltage/current?
A:·Voltage: 600Vac (L-L);
·Current: 5.5A
·Accuracy:<0.3%
7. Q: Multiple communication interfaces supported?
A: Dual RS-485, or RS485 + Ethernet.
8. Q: Supported current transformer (CT) types?
A: 1A/5A (adjustable).
9. Q: Maximum measurable harmonic order?
A: Up to 128th (standard: 63th).
10. Q: Application scenarios?
A: Power distribution for buildings, municipal facilities, hospitals, railways, airports, data centers, docks,
and solar power generation sites.
11. Q: Minimum order quantity?
A: 1 unit.
12. Q: Certifications available?
A: CE, ISO9000, factory test reports.
13. Q: Warranty period?
A: 24 months.
More details please do not hesitate to contact us.
Contact
Leave your information and we will contact you.